Description
- High solids content of over 45%
- Excellent freeze:thaw resistance
- Improves strength and workability or mortar
- Promotes adhesion of natural stone and concrete paving to substrates – can be used as a primer
ProJointTM High Performance SBR can be applied neat to the underside of paving substrates as a primer and adhesion promoter. Please note that SBR is not recommended for use as a primer for porcelain paving; for this application use ProJointTM Porcelain Primer.
Protective gloves (made of PVC) together with eye protection should be worn when using this product.
Add the SBR liquid into the cement whilst mixing. The addition rate depends on the application – as a guide, a typical addition is 200ml per 1kg of cement. Please note that this addition will reduce the amount of water needed in the mix, and will also reduce the pot life of the mixed mortar.
IMPORTANT:
Always test in a hidden area prior to use, and only proceed when satisfied with the result. The techical information supplied is based on data obtained by our own research and is considered accurate. However, no liability is accepted for any loss or damage arising directly or indirectly from the use of our products, or from the information given in publications. Prospective users should therefore satisfy themselves, by appropriate trials, that the product is suitable for the intended use.
Do not discharge waste into drains or rivers.
Store in an area free from contamination between 5 and 40o C. Protect from frost for a maximum period of 6 months.